Worm gear reducerSame as the inspection and maintenance of other reducers
　  It is forbidden to mix different lubricants with each other.The positions of the oil level plug, the oil drain plug and the breather are determined by the installation position.Their relative positions can be determined with reference to the installation position diagram of the reducer.
Worm gear reducerCheck the oil level:
Cut off the power to prevent electric shock!Wait for the reducer to cool down!
Remove the oil level plug to check if the oil is full.
Install the oil level plug.
Worm gear reducerOil inspection:
Cut off the power to prevent electric shock!Wait for the reducer to cool down!
Open the oil drain plug and take an oil sample.
Check the viscosity index of the oil
If the oil is obviously turbid, it is recommended to replace it as soon as possible.
For reducer with oil level plug
Check the oil level, whether it is qualified
Install the oil level plug
Worm gear reducerOil replacement:
After cooling, the viscosity of the oil increases and it is difficult to drain the oil. The reducer should change the oil at the operating temperature.
Cut off the power to prevent electric shock!Wait for the reducer to cool down and there is no danger of burning!
Note: The reducer should still be warm when changing the oil.
Place an oil pan under the oil drain plug.
Open the oil level plug, breather and oil drain plug.
Drain all the oil.
Install the oil drain plug.
Inject new oil of the same brand.
The amount of oil should be consistent with the installation position.
Check the oil level at the oil level plug.
Tighten the oil level plug and breather.

Zibo Boshan Ever-Power Deceleration Machinery Factory:http://www.gear-speed-reducer.xyz Welcome!
For more information, please Baidu: Ever-PowerZibo reducer, Ever-PowerBoshan reducer, Ever-PowerCylindrical worm gear reducer, Ever-PowerHard tooth surface gear reducer