Shandong Zibo Ever-PowerB seriesPlanetary cycloid reducerLubrication:
    1. The BWE.BWED planetary cycloidal pinwheel reducer adopts oil pool lubrication under normal conditions, and the oil level is kept in the middle of the oil window. It can be lubricated by circulating lubrication when the working conditions are bad and the ambient temperature is high.
    2. It is recommended to use E90# extreme pressure gear oil for the lubrication of B planetary cycloid reducer. Lubricating oil should be reconsidered when working under high and low temperature conditions.
    3. BLE.BLEDPlanetary cycloid reducerIt is necessary to strictly prevent the oil pump from cutting off the oil.
    4. When refueling, you can turn the breather cap on the upper part of the seat to refuel.When draining the oil, turn the drain plug at the bottom of the main seat to drain the dirty oil.There is no lubricating oil inside the reducer when it leaves the factory.
    5. New oil should be replaced for 100 hours after the first refueling operation, (and clean the internal dirty oil), and then continue to work afterwards, and replace it every six months (8-hour work system). If the working conditions are bad, the oil change time can be appropriately shortened. Practice has proved that frequent cleaning and oil change of the reducer (such as 3-6 months) play an important role in prolonging the service life of the reducer.Lubricating oil should be replenished frequently during use.
    6, 1#—4#BPlanetary cycloid reducerLubricating grease has been added to the factory, and it is replaced every six months.The grease adopts aluminum disulfide-2# or 2L-2# lithium-based lubricating grease.

Zibo Boshan Ever-Power Deceleration Machinery Factory:http://www.gear-speed-reducer.xyz Welcome!
For more information, please Baidu: Ever-PowerZibo reducer, Ever-PowerBoshan reducer, Ever-PowerCylindrical worm gear reducer, Ever-PowerHard tooth surface gear reducer