发布 时间:2011.10.28 news source:Zibo Boshan Ever-Power Deceleration Machinery Factory
Shandong Zibo Ever-Power tells you
Planetary cycloid reducerCommon sense of installation:
In the reducer family,Planetary cycloid reducerBecause of its small size, high transmission efficiency, wide deceleration range, high precision and many other advantages, it is widely used in servo, stepping, DC and other transmission systems.Its function is to reduce the speed, increase the torque and reduce the load/motor moment of inertia ratio under the premise of ensuring precise transmission.In the past few years, some users have broken the output shaft of the reducer due to illegal installation and other human factors when using the reducer, causing the company to suffer unnecessary losses.Therefore, in order to better help the majority of users to use the reducer, I will introduce you in detail how to install it correctlyPlanetary cycloid reducer :
The correct installation, use and maintenance of the cycloid reducer is an important part of ensuring the normal operation of mechanical equipment.Therefore, when installing the planetary cycloid reducer, please strictly follow the installation and use related matters below, and carefully assemble and use it.
1. Confirm the motor andPlanetary cycloid reducerWhether it is intact and undamaged, and strictly check whether the size of each part connecting the motor and the reducer is matched, here are the size and matching tolerances of the positioning boss of the motor, the input shaft and the groove of the reducer.
2. Unscrew the screw on the dust-proof hole on the outer side of the reducer flange, adjust the PCS system clamping ring to align the side hole with the dust-proof hole, and insert the inner hexagon to tighten.After that, remove the motor shaft key.
3. Connect the motor and the reducer naturally.It must be guaranteed when connectingPlanetary cycloid reducerThe concentricity of the output shaft and the input shaft of the motor is the same, and the outer flanges of the two are parallel.If the center is inconsistent, it will cause the motor shaft to break or the gear of the reducer to wear.
In addition, during installation, it is strictly forbidden to hit with a hammer, etc., to prevent excessive axial or radial force from damaging the bearing or gear.Be sure to tighten the mounting bolts before tightening the tightening bolts.Before installation, wipe off the rust-preventing oil at the connecting parts of the motor input shaft, positioning boss and cycloid reducer with gasoline or zinc-sodium water.Its purpose is to ensure the tightness of the connection and the flexibility of operation, and to prevent unnecessary wear.
In the motor andPlanetary cycloid reducer, The keyway of the motor shaft should be perpendicular to the tightening bolt first.To ensure uniform force, first screw on the mounting bolts at any diagonal position, but do not tighten, then screw on the other two diagonal mounting bolts, and finally tighten the four mounting bolts one by one.Finally, tighten the tightening bolts.All tightening bolts need to be fixed and inspected with a torque wrench according to the marked fixed torque data.
Planetary cycloid reducerThe correct installation between the mechanical equipment is similar to the correct installation between the cycloid reducer and the drive motor.The key is to ensure that the output shaft of the reducer is consistent with the concentricity of the driven part of the shaft.
Zibo Boshan Ever-Power Deceleration Machinery Factory:http://www.gear-speed-reducer.xyz Welcome!
For more information, please Baidu: Ever-PowerZibo reducer, Ever-PowerBoshan reducer, Ever-PowerCylindrical worm gear reducer, Ever-PowerHard tooth surface gear reducer
Previous:The use conditions of Shandong Zibo planetary cycloid reducer
Next:Development history of Ever-Power reducer in Zibo Boshan, Shandong
