Zibo, ShandongPlanetary cycloid reducerLubrication skills:    
    1,Planetary cycloid reducer40# or 50# mechanical oil lubrication is generally used at normal temperature. In order to improve the performance of the reducer and extend the service life of the cycloid reducer, it is recommended to use 70# or 90# extreme pressure gear oil to work under high and low temperature Lubricating oil should also be reconsidered at this time.
    2,Planetary cycloid reducerUnder normal conditions, the oil pool is used for lubrication, and the oil level is kept in the middle of the oil window. When the working conditions are bad and the ambient temperature is high, the circulating lubrication can be used.
    3. New oil should be replaced for 100 hours after the first refueling operation, (and clean the internal dirty oil), and then continue to work afterwards, and replace it every six months (8-hour work system). If the working conditions are bad, the oil change time can be appropriately shortened. Practice has proved that frequent cleaning and oil change of the reducer (such as 3-6 months) play an important role in prolonging the service life of the reducer.Lubricating oil should be replenished frequently during use.
    4. Vertical installationPlanetary cycloid reducerIt is necessary to strictly prevent the oil pump from cutting off the oil to avoid damage to the parts of the reducer.
    5. When refueling, you can turn the breather cap on the upper part of the seat to refuel.When draining the oil, turn the drain plug at the bottom of the main seat to drain the dirty oil.There is no lubricating oil inside the reducer when it leaves the factory.

Zibo Boshan Ever-Power Deceleration Machinery Factory:http://www.gear-speed-reducer.xyz Welcome!
For more information, please Baidu: Ever-PowerZibo reducer, Ever-PowerBoshan reducer, Ever-PowerCylindrical worm gear reducer, Ever-PowerHard tooth surface gear reducer