Worm gear reducerTechnical specifications and usage standards during installation:Worm gear reducerIt is a common power transmission mechanism, which is used in various mechanical transmission systems.
    Worm gear reducerWhether the installation and use meet the technical specifications and standards is directly related to the operation effect of the reducer.
1,Worm gear reducerThe trial operation time of the slab should not be less than two hours. The standard for normal operation is smooth operation, no vibration, no noise, no leakage, and no impact. If there is an abnormal situation, it should be eliminated in time.
2. The installation position of the reducer should ensure the operation of the staff, including convenient access to the cursor, vent plug and oil drain plug.After the installation of the reducer is completed, the inspector should comprehensively check the accuracy of the installation position in order to determine the reliability of each fastener.
3. When installing the reducer, pay special attention to the centering of the transmission center axis, and the alignment error cannot exceed the use compensation amount of the coupling used in the reducer.After the reducer is centered as required, a more ideal transmission effect and a longer service life can be obtained.
4,Worm gear reducerWhen installing the transmission parts on the output shaft of the output shaft, you must pay attention to the soft operation. It is forbidden to use hammers and other tools to rough installation. It is best to use the assembly tool and the internal thread of the end shaft to install, and the transmission parts are pressed in with the force of the bolt Reducer, which can protect the internal parts of the reducer from damage.
5. The fixation of the reducer is very important to ensure stability and firmness. Generally speaking, we should install the reducer on a horizontal foundation or base, while the oil in the oil drain tank should be able to drain, and the cooling air circulation should be smooth.If the speed reducer is not well fixed and the foundation is unreliable, there will be phenomena such as causing and vibration, and unnecessary damage to the bearings and gears.
6. When necessary, the transmission coupling of the reducer should be equipped with protective devices, such as protrusions on the coupling or the use of gears or sprocket transmission, etc. If the output bearing is subjected to a large radial load, a reinforced type should also be selected.
7. Before the reducer is running, prepare for operation. Remove the vent plug of the oil pool and replace it with a vent plug, open the oil level plug screw to check the oil line height, and add lubricating oil beyond the oil level plug screw to the hole After overflow, screw on the oil level plug and confirm that it is correct, you can start trial operation.
8,Worm gear reducerThere are many optional types of couplings, but it is best not to use rigid fixed couplings. This type of coupling is difficult to install. Once improperly installed, it will increase the load and easily cause bearing damage. Damage, or even break the output shaft.

Zibo Boshan Ever-Power Deceleration Machinery Factory:http://www.gear-speed-reducer.xyz Welcome!
For more information, please Baidu: Ever-PowerZibo reducer, Ever-PowerBoshan reducer, Ever-PowerCylindrical worm gear reducer, Ever-PowerHard tooth surface gear reducer