Solitary reduction worm gearing provides high ratio reduction with few moving parts in a close-coupled compact drive. The proper angle set up of driving-to-driven machine takes a the least space. Input and result shafts can be extended in either or both directions in horizontal or vertical plans adaptable to any installation requirement. Efficient electric motor speeds are reduced to sluggish speed requirements of several industrial machines in a single reduction.
Product Features
Ratios 5:1 to 70:1
Hollow & Solid Output Shafts
Vertical & Horizontal Mounting
Fan Cooled (Standard)
Motor Mounts (C-Encounter Adapters or Scoops)
Cast Iron or Steel Housings
Products
The exclusive usage of the involute Helicoid Thread form (with departing side contact) on the worm and gear provides for high efficiencies, and long service lifestyle. The hardened floor and polished alloy metal worm develops a simple, work hardened surface area on the bronze equipment. For this reason worm gears use in and improve with extented service while additional gears are wearing out. Ever-Power offers a broad selection of model configurations, sizes, ratios, and add-ons from our standard products.
Fabricated Designs
If your application involves serious shock loads or possible housing damage from external sources (as in steel mills or mobile devices applications) Ever-Power can offer fabricated steel housings with up to 48″ center distances. Fabricated housings provide optimum rigidity and strength that allows the transmitting of higher horsepower amounts than are possible with regular cast iron units. Extra heavy side plates connect the worm and gear shaft bearing supports, assuring correct meshing of the apparatus under all load conditions. In smaller sizes, fabricated steel reducers are interchangeable with Ever-Power regular cast iron reducers.
Custom Designs
Ever-Power can provide custom speed and reversed engineered reducers for your application, be it a fresh project or a direct drop-in replacement for a competitor’s acceleration reducer. Fabricated steel reducers allow Ever-Power to complement a competitor’s footprint, centerline, and shaft elevation allowing a primary drop-in substitute saving the client time and money.
Long – Quiet Life
All worm gears in Ever-Power reducers are produced from phosphorous bronze. Our style also incorporates a hardened, surface and polished alloy metal worm. This mixture develops a even, work-hardened mating surface area of the bronze equipment which enhances with prolonged service.
Worm gearing is a course of gear reducers that utilizes right angle, nonintersecting shafts. This style of reducer provides simple and quiet operation and allows for the likelihood of large speed reductions. These gears are available from share in a wide selection of ratios, from only 4:1 to as much as 3600:1. The compact design and building allows worm equipment reducers to be positioned in a comparatively small space. Thus, high reductions in a restricted package size may be accomplished with this configuration. Our worm gear features the continuous sliding tooth actions between worm and one’s teeth. This increases the tolerance for heavy loads and shock loads. Worm gear drives provide users high reducing convenience of relatively low cost when compared to various other types of gearing.
The utilization of worm gearing extends across many industries including food, beverage and grain and has many applications. Some applications that make use of worm gearing are: conveyors, mixers and bucket elevators.
Ever-Power worm equipment reducer gearbox series base on years of experiences uses designed teeth surface area with unsurpassed torque transfer efficiency with great functionality, efficency and price.Worm gear system transmits power through sliding get in touch with, resulting in extremely low vibration , noise, small backlash and self-locking property
-Housing:Onetime we casting creats great rigidity for severe impacts. Outer cooling fins and internal lubrication oil diversion channel design to increase heat dissipation.
-Worm Shaft: Manufactured with Carbon alloyed Steel S45C or SCM415, precison machined and carburized to HRC45 or HRC60, then for precision tooth grinding to make sure maximum contacting.
-Worm Wheel: Manufactured with Carbon alloy ALBC2, teeth are machined by precision CNC hobbing machine to sustain high impact.
A worm gear reducer is one kind of reduction gear container which contains a worm pinion input, an output worm gear, and features a right angle output orientation. This kind of reduction gear container is normally used to take a rated motor speed and produce a low speed result with higher torque value based on the reduction ratio. They often can resolve space-saving problems because the worm gear reducer is one of the sleekest decrease gearboxes available due to the little diameter of its result gear.
worm gear reducerWorm gear reducers are also a favorite type of velocity reducer because they provide the greatest speed reduction in the tiniest package. With a high ratio of speed reduction and high torque output multiplier, it’s unsurprising that lots of power transmission systems make use of a worm equipment reducer. Some of the most common applications for worm gears are available in tuning instruments, medical assessment equipment, elevators, protection gates, and conveyor belts.
SW-1 and SW-5
Torque Transmission provides two sizes of worm gear reducer, the SW-1 and the SW-5 and both are available in a variety of ratios. The SW-1 ratios include 3.5:1 to 60:1 and the SW-5 ratios include 5:1 to 100:1. Both these options are produced with rugged compression-molded glass-fill polyester housings for a long lasting, long lasting, light-weight speed reducer that is also compact, noncorrosive, and nonmetallic.
Features
Our worm equipment reducers offer a choice of a good or hollow output shaft and show an adjustable mounting placement. Both SW-1 and the SW-5, nevertheless, can withstand shock loading better than other reduction gearbox styles, making them ideal for demanding applications.
Rugged compression-molded glass-fill polyester housing
Light weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
![\"\"](\"http:\/\/nmrv-gearbox.xyz\/wp-content\/uploads\/2020\/03\/download.jpg\" "\\"\\"")
Solid or Hollow output shaftAdjustable mounting position
Worm Equipment Reducers also called worm gearbox or worm rate reducers. Worm equipment reducers are used for speed reduction and raising the torque for electrical engine drives. You can decide to attach your NEMA engine to the reducer utilizing the NEMA C encounter flange or use a coupling. If you want a coupling for the output or input shaft see our coupling section for choosing the coupling. You can expect four assemblies left hand and right hands and double result shaft and shaft insight and shaft output. Interchangeable with the majority of worm gear manufactures. Find data sheet in product overview for diamensions. Unless you see your type, please Contact Us.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Applied to Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Versions for 56C and 145TC Motors
Ever-Power DDVM series triple-reduction worm gear quickness reducers can be found in ratios from 5000:1 to 175,000:1 and center distances from 7\u201d to 20\u201d (larger sizes available on request). Result torque ranges from 33,000 in pounds. for the 7\u201d CD DDVM-70 to 582,900 in pounds for the DDVM-200. Mechanical HP input requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20\u201d CD unit. These reducers can be found in four configurations: horizontal, vertical, shafted, and shaft mounted.
These reducers are well suited for water\/waste-water equipment drive applications such as for example thickeners and clarifiers, which need a vertical down shaft. Other available configurations also make Ever-Power triple reduction reducers perfect for make use of on mixers, elevators, solar power panels, astronomical telescopes, indexing tables, hoists, conveyors, or additional process or components handling systems where huge torques\/sluggish speeds are needed.
These reducers are also obtainable with a helical major reduction stage and so are termed the HDVM series
Product Features
Ratios 5000:1 to 175,000:1
HP from 0.09 to 6.25.
Output Torque to 583,000 in lbs.
Output RPM as low as 0.01 with a 1750 RPM input.
Ideal for ultra-slow rate, high torque applications
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Applied to Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Versions for 56C and 145TC Motors
Description
The HDR Series worm equipment reducers are used in low to moderate horsepower applications to reduce speeds and increase torque. Worm gear reducers can be found in direct or indirect drive, direct drive versions are 56C or 145TC flange install with either right, still left or dual result shafts or a hollow bore result. The indirect drive models are shaft input-shaft result boxes for make use of with sprocket or pulley drive systems. They provide an effective low cost solution to speed decrease and increased torque, with higher tolerances for shock loading than helical gear reducers.
In order to decide on a gearbox speed reducer, you will need to determine the mandatory torque and services factor for the application form. Click on “Specifications” above for a desk that will aid in identifying the service aspect. For service elements above 1.0, multiply the required torque by the provider factor.
Our standard 700 Series – the heart of Ever-Power velocity reducer product line – has been serving industry reliably for over 40 years. Its confirmed modular style has set the sector standard for performance and is the most imitated product in the current worm gear rate reducer market. But why settle for a knock-off when you’re able to have the original – from Ever-Power.
Specifications
11 basic solitary reduction sizes
8 basic dual reduction sizes
1\/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow output shafts
Projecting diameters from 1\/2″ to 2-1\/4″
Hollow output bore diameters from 5\/8″ to 3-7\/16″ (with over 20 bore sizes in share)
Product Features
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating lifestyle.
Its multi-position mounting versatility permits installation in practically any position.
Housings are straddle-milled, best and bottom, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for optimum durability, in addition to greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal life.
Both 2D and 3D CAD drawings can be found in our eCatalog.
TheIncreased Quality! Industrial Rated! Inexpensive!One-piece gearcase, without external ribs, is constructed of close-grained cast iron and provides for rigid gear and bearing support. In addition, it offers excellent high temperature dissipation.Dual lip, spring-loaded seals guard against oil leakage and prevent dirt from entering.Stepped shafts with oversized ball andtapered roller bearings.Carbon steel shafts for greater power.High tensile strength cast bronze worm wheel and hardened and surface alloy steel worm made intregal with the shaft for lengthy and trouble-free life.Essential oil sight gauge for simple maintenance (unavailable on sizes 25 and 34).Factory oil filled.Every device test run just before shipment.Universal mounting with bolt-on feet.Highly modifiable design.All of this at substantially cheaper prices than you have been accustomed to spending money on reducers of lesser quality. Less<\/p>\n