Zibo Boshan Ever-Power Deceleration Machinery Factory
your location:Home - news - FAQ

news

What are the reasons for the heating of the cylindrical worm gear reducer?

发布 时间:2019.11.05 news source:Zibo Boshan Ever-Power Deceleration Machinery Factory


  1. The motor has a short circuit problem between the ties
  Motor andCylindrical worm gear reducerGenerally, it is installed by a flange and is very close. If the motor heats up, it will be transmitted to the gearbox. Please check whether the motor winding is unbalanced.
  2. Not concentric when installing the output shaft
  The deflection of the operation is too large, and there is shaking when rotating, which causes the load to be too heavy. Please adjust the concentricity.
  3. The cylindrical worm gear reducer may be overloaded
  The load of driving for a long time is too large, please check whether the load is different from usual.
  4. The bearings of the second chain of the worm reducer are severely worn
  Cause the friction between the worm wheel and the screw to be too large.Please check the wear of the bearing
  5. The lubricating oil in the cylindrical worm gear reducer is insufficient
  Or the viscosity is too high, and it deteriorates after being used for a long time. Replace the "gear oil" as soon as possible.

 

Zibo Boshan Ever-Power Deceleration Machinery Factory:http://www.gear-speed-reducer.xyz Welcome!
For more information, please Baidu: Ever-PowerZibo reducer, Ever-PowerBoshan reducer, Ever-PowerCylindrical worm gear reducer, Ever-PowerHard tooth surface gear reducer

Previous:Hard tooth surface reducer has high precision and good contact
Next:Improve the environmental conditions of the reducer

related articles