The following isBoshan reducerStructure:
1. The center wheel of the planetary cycloid reducer is also called the pin wheel. A set of pin gear pins are installed on the pin gear shell, and there is usually a pin gear sleeve on the pin gear pin.
2. Output mechanism of planetary cycloidal pinwheel reducer This type of reducer usually adopts a pin-shaft output mechanism.
3. The planet carrier of the planetary cycloid reducer is composed of an input output and a double eccentric sleeve. The two eccentric directions on the eccentric sleeve are 180 degrees to each other.
4. The tooth profile of the planetary gear of the planetary cycloid reducer is usually the inner equidistant curve of the short outer cycloid.According to the motion requirements, a planetary gear can be transmitted, but in order to achieve static balance of the input shaft and improve the load-bearing capacity, for the one-tooth-differential pendulum transmission, two planetary gears with the same odd number of teeth are often used (two-tooth pendulum The transmission is not limited by this) It is mounted on a double eccentric sleeve, and the positions of the two wheels are exactly 180 degrees apart. Between the planetary gear (cycloidal wheel) and the eccentric sleeve is installed a roller bearing (called a rotating arm bearing) to reduce friction. In order to save radial space, rolling bearings usually use roller bearings that do not require an outer race, and the inner surface of the cycloid is directly used as the raceway.

Zibo Boshan Ever-Power Deceleration Machinery Factory:http://www.gear-speed-reducer.xyz Welcome!
For more information, please Baidu: Ever-PowerZibo reducer, Ever-PowerBoshan reducer, Ever-PowerCylindrical worm gear reducer, Ever-PowerHard tooth surface gear reducer